Difference between revisions of "Translations:Simple Config/1/en"

From Installing and Using Pat Wilson Campaign Generator
Jump to navigation Jump to search
(Importing a new version from external source)
(Importing a new version from external source)
 
(2 intermediate revisions by the same user not shown)
Line 5: Line 5:
 
<br>
 
<br>
 
Setting the air, ground, AA, and CPU allocations to a low value results in the lightest possible mission.<br>
 
Setting the air, ground, AA, and CPU allocations to a low value results in the lightest possible mission.<br>
This limits mission items that require a lot of processor power.<br>
+
This limits mission items that require a lot of processor power.<br><br>
 +
[[File:simple config.png|800px]]<br><br>
 +
'''Air Density :''' Unit Density Level, simplified performance customization - low, medium, high, advanced config for custom. Warning : Medium already consumes a lot of CPU.<br>
 
<br>
 
<br>
In general "medium" is meant to be the right answer, but there is a reason why these configs are tied to a campaign and not every campaign in PWCG. Depending on the kind of campaign you are running you might want to emphasize one thing over the other.
+
In general "medium" is meant to be the right answer, but there is a reason why these configs are tied to a campaign and not every campaign in PWCG.<br>
For instance, if you was doing a ground attack campaign and probably a bomber campaign as well, you would set air activity to low and ground to high.  You would keep CPU allowance at medium and would tend to leave structure at medium. You would do this more because you don't want to be bothered so much with pesky fighters than for performance reasons.
+
Depending on the kind of campaign you are running you might want to emphasize one thing over the other.<br>
 +
For instance, if you was doing a ground attack campaign and probably a bomber campaign as well, you would set air activity to low and ground to high.  You would keep CPU allowance at medium and would tend to leave structure at medium.<br>
 +
You would do this more because you don't want to be bothered so much with pesky fighters than for performance reasons.<br>
 +
Use Medium Air with Low CPU Allowance.  That will put flights in the air than low while limiting bomber flights, which suck up a lot of CPU.<br>
 +
If you are flying a fighter campaign you might want to set ground activity to low to save CPU for more planes.<br>
 +
If you are flying a ground attack campaign, do the opposite - set air to low.<br>
 +
In the end it is planes that take up the majority of CPU cycles with bombers being the worst offenders.  Some savings can be had by reducing ground units, but a truck is not nearly as AI intensive as a plane.<br>

Latest revision as of 21:00, 11 July 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Simple Config)
The first choice of the "configuration" menu.<br>
<br>
[[File:aide_pwcg_config.PNG|300px]]
<br>
<br>
Setting the air, ground, AA, and CPU allocations to a low value results in the lightest possible mission.<br>
This limits mission items that require a lot of processor power.<br><br>
[[File:simple config.png|800px]]<br><br>
'''Air Density :''' Unit Density Level, simplified performance customization - low, medium, high, advanced config for custom. Warning : Medium already consumes a lot of CPU.<br>
<br>
In general "medium" is meant to be the right answer, but there is a reason why these configs are tied to a campaign and not every campaign in PWCG.<br>
Depending on the kind of campaign you are running you might want to emphasize one thing over the other.<br>
For instance, if you was doing a ground attack campaign and probably a bomber campaign as well, you would set air activity to low and ground to high.  You would keep CPU allowance at medium and would tend to leave structure at medium.<br>
You would do this more because you don't want to be bothered so much with pesky fighters than for performance reasons.<br>
Use Medium Air with Low CPU Allowance.  That will put flights in the air than low while limiting bomber flights, which suck up a lot of CPU.<br> 
If you are flying a fighter campaign you might want to set ground activity to low to save CPU for more planes.<br>
If you are flying a ground attack campaign, do the opposite - set air to low.<br>
In the end it is planes that take up the majority of CPU cycles with bombers being the worst offenders.  Some savings can be had by reducing ground units, but a truck is not nearly as AI intensive as a plane.<br>
TranslationThe first choice of the "configuration" menu.<br>
<br>
[[File:aide_pwcg_config.PNG|300px]]
<br>
<br>
Setting the air, ground, AA, and CPU allocations to a low value results in the lightest possible mission.<br>
This limits mission items that require a lot of processor power.<br><br>
[[File:simple config.png|800px]]<br><br>
'''Air Density :''' Unit Density Level, simplified performance customization - low, medium, high, advanced config for custom. Warning : Medium already consumes a lot of CPU.<br>
<br>
In general "medium" is meant to be the right answer, but there is a reason why these configs are tied to a campaign and not every campaign in PWCG.<br>
Depending on the kind of campaign you are running you might want to emphasize one thing over the other.<br>
For instance, if you was doing a ground attack campaign and probably a bomber campaign as well, you would set air activity to low and ground to high.  You would keep CPU allowance at medium and would tend to leave structure at medium.<br>
You would do this more because you don't want to be bothered so much with pesky fighters than for performance reasons.<br>
Use Medium Air with Low CPU Allowance.  That will put flights in the air than low while limiting bomber flights, which suck up a lot of CPU.<br> 
If you are flying a fighter campaign you might want to set ground activity to low to save CPU for more planes.<br>
If you are flying a ground attack campaign, do the opposite - set air to low.<br>
In the end it is planes that take up the majority of CPU cycles with bombers being the worst offenders.  Some savings can be had by reducing ground units, but a truck is not nearly as AI intensive as a plane.<br>

The first choice of the "configuration" menu.

Aide pwcg config.PNG

Setting the air, ground, AA, and CPU allocations to a low value results in the lightest possible mission.
This limits mission items that require a lot of processor power.

Simple config.png

Air Density : Unit Density Level, simplified performance customization - low, medium, high, advanced config for custom. Warning : Medium already consumes a lot of CPU.

In general "medium" is meant to be the right answer, but there is a reason why these configs are tied to a campaign and not every campaign in PWCG.
Depending on the kind of campaign you are running you might want to emphasize one thing over the other.
For instance, if you was doing a ground attack campaign and probably a bomber campaign as well, you would set air activity to low and ground to high. You would keep CPU allowance at medium and would tend to leave structure at medium.
You would do this more because you don't want to be bothered so much with pesky fighters than for performance reasons.
Use Medium Air with Low CPU Allowance. That will put flights in the air than low while limiting bomber flights, which suck up a lot of CPU.
If you are flying a fighter campaign you might want to set ground activity to low to save CPU for more planes.
If you are flying a ground attack campaign, do the opposite - set air to low.
In the end it is planes that take up the majority of CPU cycles with bombers being the worst offenders. Some savings can be had by reducing ground units, but a truck is not nearly as AI intensive as a plane.